top of page
Magnum 60mm / 63mm Figure Wheels

Magnum 60mm / 63mm Figure Wheels

Magnum 49D, 53D, 57D, and 60D - 60mm and 63mm loop and figure wheels provide a great range of grip and lot’s of roll. These are a less expensive version of the Giotto professional figure wheels and are used for the large circles as well as loops. A few also use the Magnum wheels as a low cost dance wheel for beginners in competition. Most  competitors use 63mm for the large circles and use combinations of hardnesses to achieve the best skating result. RollLine has developed this wheel giving it properties that provide great roll with just the right amount of grip for figures. The 49D, 53D, 57D, and 60D provide a great varying range of grip in the wheel material and is for a skating surfaces with a range of grip. For most skaters, a hardness one (1) level softer than is used for large circles is generally used for loops, including the push wheels (1 step down. 

The tread color identifies which hardness the wheels are.

  • Grey = 49D
  • Cream = 53D
  • Yellow = 57D
  • White = 60D

 

Set of 8 wheels

 

In the USA, most skaters use the 60D, while stepping down to the 53D or sometimes the 57D for the inside toe wheels as additional push wheels.

 

The softer the wheel, or lower shore “D” hardness number, the more the grip and slightly less roll. The harder the wheel, or higher shore “D” number, the more the roll, with slightly less grip.  The shore “D” scale is used for rubber and plastics, while the shore “A” scale is used for urethane.

 

It is almost always recommended to use spacers in the wheels, when using standard 7mm bearings. 

    $62,00Prezzo

    Prodotti correlati